Residential Water Wells

Residential Water Wells




Drilling a well for water supply is one of the concerns faced by the homeowner and home builders. This is because there are several considerations needed to ensure that you can have a good water quality for your home.

Prior to drilling a well, it is recommended that the water from the ground source be tested first to assure quality and safety of water. Aside from this, you also need to check the regulation of your area regarding the ownership of a private well.

Choosing the Site for Water Well

The performance and safety of your well will rely on your choice of its location. When inspecting different sites, you have to make sure that the possibility of having a future development plan in your character is considered. This is because once the well is drilled; you can longer make any development on that site.

Contaminants often go into the well on top of the casing or around it from the outside. Sewage and other contaminants could pass by slowly into the upper ground surface layers to the water table or aquifers.

The following factors can help to avoid the possible water contamination in your well.

  • The well should be easy to reach for monitoring, testing, cleaning, repair and maintenance.
  • The well location should be up-slope to prevent possible contaminants such as septic systems, from seeping into the aquifer.
  • The surrounding ground of the well is also sloped away to avid surface water runoff
  • The well should not be located in a well pit.

Filtering Well Water

Well water, unlike city and municipal water, is drawn direct from the ground and does not pass by any filtration system before it can be consumed. Filters are not just used for removing viruses and bacteria from your well water supply, but also to trap the sediments which could be present in the water and present a serious problem in your water source. When water is unfiltered, it can consequence to bad smell and taste.

There are several water filtration systems for well waters; however, if you want to get best results go for those that have multiple filters such as carbon filters. The system could be installed in several locations like at the pump itself, under the sink, at the entry point of water in your home, or in countertop. Doing a bit of research can help you in finding the right filtration system for your well water.

Anyone who has a well for his water supply should have a filtering system installed. This is to make sure that no unhealthy contaminant will infect the liquid. Water from well may contain pathogens that can cause serious ailments.

You can have your well water regularly tested or just install a reliable filtration system to eliminate the unhealthy particles without removing the important minerals needed by the body. Installing water is a more economical option than having the water tested every now and then.

Benefits of Well Water

Health Benefits – well water can be filtered without the need of chemicals like chlorine. This will provide the health benefits without the additional chemicals that can possibly harm the body.

Consumption and Taste – water from well is known to have softer taste compared to the city and municipal water. Unlike the water treated with chemicals, well water is softened naturally. Soft water from well can add to its uncommon taste.

ecosystem friendly – the filtration systems installed for well water are a lot more eco-friendly compared to the water treatment plants where the water supply for urban areas come from. Using well water reduces the use of pollution caused by chemicals and pollutants from treatment plants.

Financial Benefits – installing water well for your private use can make you eligible for various tax breaks, aside from being freed from water usage satisfy. Installing a well is also a long-term investment unlike when you rely on city water service wherein you will receive a monthly bill.




leave your comment

Top